Name :   Des Lavender
Comment :   Yours looks neat. The other guy has thought laterally and it looks what it is; a bike with the front forks replaced by a tub with whells etc. Its a joke!!
E-mail :   des.lavender@btinternet.com
URL :   lavendertherapies.com (coming soon)
City :   Hornchurch
State :   Essex (England)
Date of entry :   16th March 2004
Name :   Bill Martinez
Comment :   Well done! Mussers contraption looks like an F1 car with a Ninja stuck up its ass, While yours is a beauty. Perhaps a bit notchy behind the cockpit, but definitely a work of art.
E-mail :   willmart@earthlink.net
URL :   
City :   Placerville
State :   CA
Date of entry :   3-1-04
Name :   Großmann
Comment :   Fantastic ! Im very sad that the german TÜV (Street-machine-authority) would not agree with such a construction. P.S.: The other one looks a little bit like a wrong parked motorcycle with a backseat for the mother-in-law, nice reflection, isntit. Ingo
E-mail :   
URL :   
City :   Ingolstadt
State :   Germany
Date of entry :   23.02.04
Name :   Celso Moitinho
Comment :   ...A few years ago, a similiar concept crossed my mind, but the fear of licensing problems kept them from materializing.I went as far as producing technical drawings of different components & overall shape...since seeing your pictures, I have gainned th
E-mail :   www.ccjust@rogers.com
URL :   
City :   Ottawa
State :   Ontario/Canada
Date of entry :   23/02/04
Name :   Jeff C.
Comment :   Amasing!!!!!! Your Indy Cycle looks a hell of alot better than Jim Musser. I viewed his site looked at his concepted and it just look like he slapped a motorcycle section on. Cheesey looking. Your concept look well thought and not a mishmash.YOUR THE MAN!
E-mail :   githgithgith@yahoo.com
URL :   
City :   
State :   
Date of entry :   Feb 23,2004
Name :   Bill Matisz
Comment :   Nice Work. Im in the early stages of turning a 500 to 650 cc class motorcycle into a more exciting econocar ( three wheeled ) similar to your design. I have a old Susuki GS550 donor bike and an currently trying to figure out the front suspension - the rea
E-mail :   bmatisz@hotmail.com
URL :   
City :   Oshawa
State :   Ontario, Canada
Date of entry :   February 17, 2004
Name :   Pop Sykl
Comment :   One of the best three wheelers I have seen. Great Work. I am going back to see if I can find your plans
E-mail :   nitelife@socket.net
URL :   
City :   Troy
State :   Missouri
Date of entry :   2/14/04
Name :   Laif Salvadori
Comment :   Well done conversion work. You should sell your kit plans
E-mail :   laif@intermind.net
URL :   
City :   las Vegas
State :   nv
Date of entry :   
Name :   Frank Budelman
Comment :   Great piece of engineering! I would love to see the plans when they become available..Thanks
E-mail :   boots207@msn.com
URL :   
City :   Silver Spring
State :   Maryland
Date of entry :   02052004
Name :   Ray Wiebusch
Comment :   I nead more info on frame bild ifposible? YOU WILL be getting letter from me getting your plans for this trike hopping to get more info.
E-mail :   worthug@aol.com
URL :   5626 lagrant rd.
City :   sterling
State :   Michigan
Date of entry :   2-2-04
Name :   Webmaestro
Comment :   Very nice and useful website. Please visit my website!!! :)
E-mail :   
URL :   http://www.metropolis5000.com
City :   Miami
State :   Florida
Date of entry :   Jan-24-2004
Name :   Michael Rieder
Comment :   WOW! I have been had a grin on my face all day thinking about your invention. I have an extra Honda 1991 ST1100 to build on. Should I invest in your plan?
E-mail :   spdster@telis.org
URL :   
City :   Thousand Oaks
State :   CA
Date of entry :   3 JAN 4
Name :   Wayne
Comment :   You are a true visionary, this vehicle would sure put the hurtin on the fat cats in the oil industry..! Question; Have you looked into Rotation Molding to make the body? The material is tough and process cheap once the mold has been made. (Just a thought)
E-mail :   Hovernut2@hotmail.com
URL :   
City :   Canton
State :   Ohio
Date of entry :   X-mas eve 2003
Name :   Dan
Comment :   Yours is a very inspiring idea!! Have you gotten any feedback from people who built one from your plans in terms of cost to build? Any advice for someone thinking about building something similar would be great, thanks. Oh, and yours is hands down a nice
E-mail :   bdwyke@ptdprolog.net
URL :   
City :   Morgantown
State :   PA
Date of entry :   12/3/03
Name :   Evgeny
Comment :   Software development from Pilot Group: web and application software, web design. http://www.pilotgroup.net Software development
E-mail :   evgeny@yahoo.com
URL :   http://www.pilotgroup.net
City :   
State :   
Date of entry :   
Name :   Larry from Davenport
Comment :   Just finished the frame build, lets just say it was interesting but not difficult. ready to start the front suspension soon asI buy the materials. Cost so far in materials.
E-mail :   lb_dav
URL :   
City :   Davenport
State :   Iowa
Date of entry :   12/01/03
Name :   Larry from Davenport
Comment :   Just finished the frame build, lets just say it was interesting but not difficult. ready to start the front suspension soon asI buy the materials. Cost so far in materials.
E-mail :   lb_dav
URL :   
City :   Davenport
State :   Iowa
Date of entry :   12/01/03
Name :   capatina aurel
Comment :   i like yor trike. how much it cost to build
E-mail :   smouse@hotmail.com
URL :   
City :   craiova
State :   romania
Date of entry :   25.11.2003
Name :   Jim Boyd
Comment :   Hi! I have viewed your site, then took your challenge of going to Jim Mussers site. I think you have done a much nicer job of integrating the rear of the bike into your trike the he did!
E-mail :   jim_boyd@lycos.com
URL :   
City :   Paradise
State :   CA
Date of entry :   11.24.03
Name :   graham
Comment :   yours is SO MUCH BETTER LOOKING than that other guys. his is downright dorky.
E-mail :   notpurple
URL :   
City :   
State :   
Date of entry :   
Name :   Steve Jones
Comment :   Had a look at Mussers. Its a Messer in comparison. Youre design is much cleaner and asthetically pleasing! Way to go!
E-mail :   steven.1.jones@gm.com
URL :   
City :   
State :   
Date of entry :   
Name :   Steve Jones
Comment :   Had a look at Mussers. Its a Messer in comparison. Youre design is much cleaner and asthetically pleasing! Way to go!
E-mail :   steven.1.jones@gm.com
URL :   
City :   
State :   
Date of entry :   
Name :   Colin Russell
Comment :   Awesome 3 wheeler!
E-mail :   
URL :   
City :   Calgary
State :   Alberta,Canada
Date of entry :   Oct29/03
Name :   Ken jaeckel
Comment :   thinking about building 3 wheel car. want something that corners really well how does 3wheels compare to 4
E-mail :   kenjaeckel@optonline.net
URL :   
City :   medford
State :   ny
Date of entry :   10/15
Name :   Larry from Davenport
Comment :   sent out my money order for plans today. Ready to get started, Work bench is cleared and ready to go! Ill keep you posted on the progress of the build
E-mail :   lb_dav@hotmail.com
URL :   
City :   Davenport
State :   Iowa
Date of entry :   10/14/03
Name :   Taylor Moore
Comment :   I am interested in getting a copy of the plans. What do anticipate the cost of building this not including the donoe bike. Also i own a couple of 3D animation schools and want to know if you want to get a CAD drawing created. Also how many man hour to bui
E-mail :   purple-pickle@shaw.ca
URL :   www.newmediacampus.com
City :   Okanagan Falls
State :   BC Canada
Date of entry :   oct 10/03
Name :   Bill Peterson
Comment :   You built exactly what Ive had in my head for years! Its got to be a lot of fun and a rewarding accomplishment as well. One day, I always say....
E-mail :   bill.peterson@martinmarietta.com
URL :   
City :   raleigh
State :   nc
Date of entry :   10/5/2003
Name :   Pablo Maury
Comment :   Yours is way too cool to compare. Its so simple, yet so complete.I will like too see more of it. Are there any plans yet?
E-mail :   y1prototype@yahoo.com
URL :   
City :   Caracas
State :   Venezuela
Date of entry :   10/03/2003
Name :   Ed Rowley
Comment :   Hi, your Indycycle ROCKS! I looked at the other design, no competition. Ill be ordering plans! Thanks for sharing your project.
E-mail :   erowley@yellowbananas.com
URL :   
City :   Hyndman
State :   PA
Date of entry :   29SE03
Name :   lightning motorcycles
Comment :   nice ride - I prefer yours - simplicity with good design is very hard to achieve.
E-mail :   trykes@nmia.com
URL :   www.lightningmotorcycles.com
City :   albuquerque
State :   nm
Date of entry :   9-29-03
Name :   jake
Comment :   I like your cycle bike verry much. could it be street leagel or just sport
E-mail :   jakegwt@yahoo.com
URL :   
City :   san diego
State :   ca
Date of entry :   09/23/03
Name :   Marshall A. Rent
Comment :   Thats very interesting! Any problems with licensing? Any sway control for the front end?
E-mail :   ram25@psu.edu
URL :   
City :   Bellefonte
State :   PA
Date of entry :   09-17-2003
Name :   Mark - Viper GTS
Comment :   0 to 60 in ?? secs ?
E-mail :   mach4@usa.com
URL :   
City :   Owings Mills
State :   Md
Date of entry :   Sep 17 03
Name :   Blake Jones
Comment :   looks very nice the finishing is exelent. Do you have any plans to sell the plans.
E-mail :   ceebmoj@msn.com
URL :   
City :   
State :   
Date of entry :   3,9,03
Name :   Steve Patrick
Comment :   Beautiful Bike! I have been interested in the Tri-Magnum for years, but this is more what I was looking for. How does it handle? How much do you think it would cost in materials only? Aw, who cares, Ill be ordering plans soon!
E-mail :   stevreb07@aol.com
URL :   
City :   Midvale
State :   Utah
Date of entry :   8/31/03
Name :   BRIAN WEISCHEDEL
Comment :   
E-mail :   BRW11202AOL.COM
URL :   
City :   NUTLEY
State :   NJ
Date of entry :   8/03
Name :   B. Davey
Comment :   Best looking three wheeler I have seen. So, when will the plans be ready?
E-mail :   brian.davey@horizonair.com
URL :   
City :   Portland
State :   OR
Date of entry :   8-25-03
  
Build you own website | Yahoo! GeoCities